Marble Cutting & Stone Fabrication in Dubai

Our planning rate for standard straight cut-to-size work starts from AED 30 per linear metre. Mitres, curves, polished edge profiles, holes, sink / hob openings, grooves and custom CNC or waterjet work have separate rates because they require different setup and finishing. The final quotation follows the cutting list, material, thickness, quantity and required finish.

Yes, customer- or contractor-supplied material can be reviewed for workshop cutting. We first need the material type, thickness, visible condition, dimensions and required pieces. Acceptance for fabrication does not make us the manufacturer or supplier of the slab, and hidden weakness, previous damage or natural defects may affect what can safely be cut.

Send the approved drawing or cutting list, material reference, slab / tile thickness, finished piece dimensions, quantity, face / vein direction, exposed edge profile, openings, hole sizes and any piece-numbering requirement. Approximate site dimensions are not enough for irreversible custom fabrication.

Yes. Standard sink, cooktop and tap openings can be fabricated from confirmed appliance templates, approved drawings or verified final measurements. Undermount sink openings normally need more edge finishing than top-mount openings because the cut edge remains visible.

Yes, suitable stone can be prepared with 45° mitres and built-up / laminated edge details. The final feasibility depends on material, thickness, edge length, support, joint location and the finished visual requirement; the mitre cut alone should not be confused with the complete bonded assembly.

Curves, radius details and more complex profile work can be reviewed. The method depends on geometry, material, thickness and the workshop equipment currently available for the production period. We do not promise a particular machine process before the component has been assessed.

This Marble Cutting page is for cut-to-size pieces, standard shapes, mitres, profiles, holes, cut-outs, grooves and general fabrication. The Waterjet service is the better route for medallions, logos, intricate curves, borders and multi-material inlays where decorative geometry is the main requirement.

These materials can be reviewed, but they are not treated as ordinary marble. Engineered quartz and large-format porcelain / sintered slabs have product-specific fabrication, support, cut-out and handling requirements. We confirm compatibility from the actual product and thickness before accepting a detail.

Yes. We can prepare cut-to-size stair treads, risers, skirting, thresholds, sills and transition pieces. Tell us which edges remain exposed, where mitres are required and whether the pieces need numbering for a specific floor, room or stair sequence.

Not unless the written quotation says so. The public cutting rates are workshop planning rates. Slab / material supply, site measurement, delivery, lifting, installation, reinforcement, adhesives, mechanical anchors, sealing and protection are separate scope items when required.

For natural stone we can use approved slab layouts, face direction, piece numbers and cutting-list references so related pieces are cut in the intended sequence. Book-matching and vein continuity require enough suitable slab area and customer / consultant approval; they can increase wastage and fabrication time.