MARBLE SERVICES IN DUBAI

Marble Services in Dubai

Choose by the condition, surface and finish—not by guesswork.

Start with the job in front of you.

Compare specialist marble services, starting rates and the type of work each route is designed to solve. If stone is sound but dull, start with polishing. If it is damaged, start with restoration. For new work, choose installation, mechanical fixing, cut-to-size fabrication, countertops, waterjet or specialist stonework.

COMPARE ALL SERVICES REQUEST A SITE ASSESSMENT

10specialist service routes

START WITH THE RESULT YOU NEED

01Existing marble looks dullPolishing from AED 14 /m² 02Marble is dirty or stainedCleaning from AED 12 /m² 03Scratched, chipped or crackedRestoration from AED 27 /m² 04New floor, wall or staircaseInstallation from AED 69 /m² 05Custom counter or stone detailFabrication from AED 111 /lm 06Outdoor stone applicationExterior work from AED 54 /m² 07Large or heavy stone panels need anchorsMechanical fixing from AED 126 /m² 08Slabs or stone pieces need cutting / fabricationStraight cutting from AED 30 /lm

ALL MARBLE SERVICES

One service hub. Ten specialist routes.

Choose the work that matches the problem.

Each card below leads to a dedicated service page. Cutting is now separated from countertops and waterjet so cut-to-size fabrication, fitted worktops and decorative pattern cutting do not compete as one vague service. Starting rates are planning figures before drawings, measurements and material are confirmed.

Professional marble floor polishing in a luxury Dubai interior

01 FROMAED 14/m²

For sound marble that has lost clarity, gloss or an even sheen.

Marble Polishing

Choose polishing when the stone is generally intact but looks dull, hazy or uneven under light. The service can restore reflectivity without treating the floor as a full structural repair project.

Dull floors
Low or uneven sheen
Post-cleaning finish recovery

Polishing & crystallisationAED 14 /m²

Diamond polishingAED 21 /m²

Honing & refinishAED 24 /m²

Choose another route when: Deep cracks, chips or severe lippage need corrective restoration first.

Explore Marble Polishing

Professional marble deep cleaning on a polished natural stone floor

02 FROMAED 12/m²

For dirt, residue, grout build-up and surface contamination before heavier work is considered.

Marble Cleaning

Cleaning is the right first route when the marble is structurally fine but looks tired because of dirt, residue or maintenance build-up. It avoids unnecessary grinding when the problem is primarily contamination.

Deep cleaning
Residue & build-up
Joint / grout refresh

Marble deep cleaningAED 12 /m²

Regrouting & joint touch-upAED 18 /m²

Spot stain treatmentAED 30 /spot

Choose another route when: Cleaning will not remove structural cracks, chips or deep scratches.

Explore Marble Cleaning

Marble craftsman repairing and refinishing damaged natural stone

03 FROMAED 27/m²

For worn, scratched, chipped or cracked marble that needs corrective work—not just shine.

Marble Restoration

Restoration combines assessment, local repair and finish correction where existing marble has visible damage or uneven wear. It is the better route when polishing alone would leave defects visible.

Scratches & wear
Chips and small cracks
Uneven finish

Full restorationAED 27 /m²

Scratch reduction & blendAED 33 /m²

Crack fillingAED 48 /repair

Choose another route when: If the surface is simply dirty or dull, cleaning or polishing may be enough.

Explore Marble Restoration

Installers aligning large marble wall panels in a premium interior

04 FROMAED 69/m²

For new marble floors, feature walls, bathroom surfaces, staircases and architectural cladding.

Flooring & Wall Cladding

Use this route for new installation where set-out, substrate condition, fixing method, joints and alignment all affect the finished result. It covers both horizontal and vertical marble applications.

New floors
Feature walls & cladding
Stairs and wet areas

Floor installationAED 69 /m²

Wall claddingAED 96 /m²

Complete staircaseAED 315 /step

Choose another route when: Existing installed marble that only needs cleaning, polishing or repair belongs in the relevant aftercare service.

Explore Flooring & Cladding

Luxury marble countertop and vanity fabrication detail

05 FROMAED 111/lm

For kitchen worktops, vanity tops, cut-outs, edges and made-to-measure stone surfaces.

Countertops & Vanity Tops

This service is fabrication-led. Measurements, slab selection, cut-outs, edge profiles and installation interfaces are reviewed together so the finished counter fits the actual cabinetry and services.

Kitchen worktops
Vanity tops
Sink / hob cut-outs & edges

Countertop fabricationAED 111 /lm

Vanity top fabricationAED 420 /top

Sink / hob cut-outAED 72 /cut-out

Choose another route when: Floor and wall installation should use the flooring and cladding route instead.

Explore Countertops

Decorative natural stone waterjet medallion and precision inlay pattern

06 FROMAED 299/design

For custom medallions, borders, logos and geometric stone details where ordinary straight cuts are not enough.

Waterjet Patterns & Inlays

Waterjet work starts with design geometry and material planning. It suits feature pieces where repeatability, fine curves and multi-material inlays are part of the architectural intent.

Floor medallions
Borders & inlays
Custom decorative geometry

Waterjet / custom inlayAED 299 /design

Complex multi-material workCustom Quote

Choose another route when: Standard straight-cut installation does not need specialist waterjet fabrication.

Explore Waterjet & Inlays

Finished luxury marble surfaces showing polished, honed and protected architectural stone

07 FROMAED 15/m²

For controlling sheen, texture and protection after installation or corrective work.

Stone Surface Finishing

Finishing changes how the stone reads and performs: polished for reflectivity, honed for a softer matte appearance, brushed for texture, or sealed for protection. The choice should suit the material and use area.

Polished / honed appearance
Brushed texture
Seal & protect

Seal & protectAED 15 /m²

Polished finishAED 21 /m²

Honed finishAED 24 /m²

Choose another route when: Damaged stone should be repaired before the final finish is selected.

Explore Surface Finishing

Premium exterior stone paving and facade work in a modern UAE property

08 FROMAED 54/m²

For terraces, pool surrounds, exterior paving, columns and specialist external stone applications.

Hard Landscaping & Exterior Stonework

Exterior stonework has different exposure, drainage, access and substrate demands from interior marble. This route is for outdoor areas where fixing method and finish must suit weather and use conditions.

Outdoor paving
Balconies & terraces
Poolside and exterior cladding

Outdoor stone installationAED 54 /m²

Balcony / terrace workAED 57 /m²

Poolside installationAED 66 /m²

Choose another route when: Interior polishing, restoration or fabrication should use the dedicated interior service pages.

Explore Exterior Stonework

Installers mechanically fixing large marble wall panels with brackets and rails in a luxury Dubai interior

09 FROMAED 126/m²

For large, heavy or vertically installed stone panels that need brackets, anchors, rails or another mechanically restrained fixing system.

Mechanical Fixing / Installation

Mechanical fixing is the route for stone that cannot rely on a straightforward adhesive or mortar bond alone. Panel size, weight, installation height, substrate, cavity depth and project specification are reviewed before the anchor or rail layout is confirmed.

Large-format wall panels
Heavy vertical marble / stone
Dry, anchored or rail-supported cladding

Mechanical fixing / installationAED 126 /m²

Large-format dry fixingAED 144 /m²

Complex anchor / rail fixingAED 162 /m²

Choose another route when: Standard floor installation and straightforward adhesive-fixed interior walls usually belong under Flooring & Wall Cladding instead.

Explore Mechanical Fixing

Cut-to-size marble and stone fabrication with finished edges and openings

10 FROMAED 30/lm

For slabs, tiles and stone pieces that need exact cut-to-size fabrication, mitres, curves, edge profiles, holes, grooves, sink / hob openings or labelled components before installation.

Marble Cutting & Stone Fabrication

Use this route when the main job is workshop preparation of stone components. We work from approved dimensions, drawings or cutting lists, then coordinate straight and angled cuts, openings, edge finishing and piece identification around the final use.

Cut-to-size slabs & pieces
Mitres, edges, holes & cut-outs
Stairs, skirting, thresholds & custom components

Straight cut-to-sizeAED 30 /lm

45° mitre cutAED 48 /lm

Straight / eased edge polishAED 36 /lm

Choose another route when: Intricate decorative medallions, logos and multi-material inlays belong under Waterjet Patterns & Inlays; a complete installed kitchen / vanity package belongs under Countertops & Vanity Tops.

Explore Marble Cutting

WHICH SERVICE SHOULD I OPEN?

Match the service to what is actually happening on site.

The quickest way to avoid over-scoping or under-scoping the job is to start with the visible condition and the intended result.

The marble is clean but looks flat or cloudy

Marble Polishing The surface is intact; the main goal is clarity and sheen recovery.

The marble is dirty, greasy or has maintenance build-up

Marble Cleaning Remove contamination first before deciding whether corrective finishing is needed.

There are scratches, chips, cracks or worn patches

Marble Restoration Correct defects before trying to improve final sheen.

The project needs new floors, walls or stairs

Flooring & Wall Cladding The work depends on set-out, substrate, fixing method, alignment and joints.

You need a worktop, vanity top or cut-outs

Countertops & Vanity Tops This is measured fabrication rather than general floor or wall installation.

The design includes medallions, curves, borders or inlays

Waterjet Patterns & Inlays Specialist cutting is required for repeatable decorative geometry.

The stone needs a specific sheen, texture or protective finish

Stone Surface Finishing Select polished, honed, brushed or sealed finishing based on use and material.

The work is outdoors, poolside or on an exterior facade

Hard Landscaping & Exterior Stonework External exposure, drainage and fixing conditions need a dedicated scope.

Large or heavy wall panels require brackets, anchors or support rails

Mechanical Fixing / Installation Use this route when panel weight, vertical height, substrate or project specification requires a mechanically restrained system rather than adhesive-only fixing.

You already have stone, drawings or a cutting list and need pieces cut, mitred, profiled or opened before installation

Marble Cutting & Stone Fabrication Use this route when cut-to-size fabrication, edge profiles, holes, cut-outs, stair pieces, skirting or labelled components are the main requirement.

HOW STARTING RATES BECOME A QUOTE

The rate gives you a planning point. The site defines the final scope.

We keep the service-page rates visible so you can budget before contacting us. A written quote is then based on the actual project rather than a generic square-metre number.

SEND PHOTOS FOR AN EXACT QUOTE

What changes the final quote?

Marble / stone type
Current condition and preparation
Measured area or fabrication quantity
Access and working conditions
Fixing method, joints and edge details
Required finish and project programme

Materials are excluded unless specifically stated. Starting rates are indicative and may change after inspection, measurements and project requirements are confirmed.

SERVICE SELECTION QUESTIONS

Choose the right route before you request a quote.

01Which service should I choose if my marble is dull but not damaged?

Start with Marble Polishing. If the stone is structurally sound and the main issue is lost sheen, haze or an uneven reflection, polishing is normally the more appropriate route than full restoration.

02When is restoration better than polishing?

Use Marble Restoration when there are visible scratches, chips, cracks, worn patches or local defects that need corrective work. Polishing can improve sheen, but it should not be used to hide damage that needs repair first.

03Can marble cleaning remove scratches?

No. Cleaning removes dirt, residue and maintenance build-up. If scratches remain after the surface is clean, the project may need polishing, honing or restoration depending on their depth and condition.

04Do the starting prices include marble or stone materials?

Not unless a rate explicitly says otherwise. The service hub shows indicative starting labour or service rates. Material supply, unusual access, specialist fabrication and project-specific requirements are confirmed in the written quotation.

05Can one project require more than one marble service?

Yes. A renovation may combine cleaning, local restoration and final polishing; a new project may combine flooring, wall cladding, mechanical fixing, cut-to-size fabrication, countertops and finishing. We scope the sequence so workshop cutting, delivery and installation are coordinated rather than treated as unrelated tasks.

06What should I send if I am not sure which service I need?

Send clear photos, the project location and a short description of what you see or want to achieve. We can then direct the enquiry to the most suitable service and arrange a site assessment when needed.

07What is the difference between Marble Cutting, Countertops and Waterjet?

Marble Cutting & Stone Fabrication is for cut-to-size pieces, mitres, profiles, holes, grooves, cut-outs, stairs, skirting and general component preparation. Countertops & Vanity Tops owns complete measured worktop packages including site interfaces and installation. Waterjet Patterns & Inlays is for intricate decorative geometry, medallions, logos, borders and multi-material inlays.

NOT SURE WHICH SERVICE FITS?

Show us the marble. We’ll route the project correctly.

Send photos, your area and the condition of the stone. We will review the scope and use the right service route before pricing the job.

SEND PROJECT DETAILS BACK TO MARBLE FIXING